|
4 HP Elco
Inboard Electric Boat Motor |
| |
| Motor: |
|
4 HP DC SEPX
(Separately Excited) |
|
14" Long x
7" diameter, 60 lbs. |
|
1,900 RPM (max) |
|
|
| Standard
Aluminum Mount: |
|
24" x
12" x 1/2 " - 6061
Aluminum, 20 lbs. |
|
Note:
Pulleys, idler, belts and mounts included. Each
installation may require a custom mount. |
|
|
| Charger
Panel (48 VDC): |
|
Consists of four (4)
12 volt chargers mounted on two (2) aluminum panels, 28 lbs. |
|
14" high x
16" wide x 4" deep, 14 lbs. each |
|
Note: Chargers can be mounted separately
as two (2) units of 7" X 10" to accommodate
space restrictions
(units should be upright and in a dry location). |
|
|
| Control
Unit: |
|
12" high x
12" wide x 4" deep, 12 lbs. |
|
|
| Instrument
Panel: |
|
3 1/4" high x 7
1/2" wide, 2 lbs. |
|
Note: Space required behind
the panel is 5" deep |
| |
|
| Forward /
Reverse Continuous Throttle: |
| |
An encapsulated
potentiometer that give full forward, neutral detent and full reverse in
one sweep action. |
| |
3 3/4" deep x 8 1/2" high
with 14" sweep |
| |
Housing is 1 3/4" diameter
x 4" deep, 0.5 lbs. |
|
|
| Electronic
Battery (optional): |
|
Consists of a DC-DC
converter (48 volts to 12 volts) as a battery charger and
a 33AH A.G.M. battery with wiring |
|
10" high x 8"
wide x 19" long enclosure |
|
|
| Batteries,
Sealed Lead Acid, Absorbed Glass Mat: |
|
Each battery is 12 VDC |
|
Minimum: eight (8)
series 31 batteries, 68 lbs. each |
|
Range at cruising
speed = 2 hours |
|
Battery dimensions
12.97" long x 6.74" wide x 9.88" high
(each) |
| OR |
|
|
Minimum: four (4)
series 4D batteries, 130 lbs. (each) |
|
Range at cruising
speed = 2 hours |
|
Battery dimensions
20.73" long x 8.60" wide x 10.27" high
(each) |
|
Note: These batteries can be mounted on
their sides or ends. Battery size (series) is determined by range
desired. Larger or additional batteries will increase
range. |
